Jio F30C IMEI Repair Tool | Jio F30C IMEI 0 Solution - myTechnoTech-know to fix computer and mobile problem and other

Jio F30C IMEI Repair Tool | Jio F30C IMEI 0 Solution

Share This

Jio F30C IMEI Repair Tool | Jio F30C IMEI 0 Solution

Are you getting Jio F30c IMEI tool to improve Jio F30c IMEi number here? If yes then you are at right place. Here in this post we will show you an easy method of writing IMEI on jio F30c to fix null IMEI or invalid IMEI number problem.

If you are not facing any network on Jio F30c then it may be due to hardware problem or software problem. Just type * # 06 # from the dialer and check the IMEI status of the device. If it is showing IMEI 00000 or invalid imei or null IMEI then you can fix it without any extra effort. Just note down your original IMEI number and flash it using the QLM IMEI tool. Bus.

Most probably, you can know that the Jio F30c is a Qualcomm keypad mobile, so we can use any Qualcomm IMEI repair tool, such as Miracle Tool, IMEi tool or QLM imei tool ect.

But here we recommend you to use the free QLM IMEI tool which is specially designed for all Qualcomm devices [keypad and Android]. The best thing about the QLM imei tool is that it is a portable IMEI software, so there is no need to install it on a PC.

For these reasons, we are highly recommending you use the Qualcomm QLM IMEI tool as the Jio F30C IMEI tool.

Jio f30c keypad no need to go somewhere to fix the network problem on mobile. You can do it in a few minutes.

Download Jio F30C IMEi Tool and Drivers

Download  Jio F30C IMEI Tool

Download  Drivers

How to write IMEI on JL F30C using QLM IMEI tool

The QLM imei repair process is the same for all Jio Qualcomm mobiles, including other Qualcomm smartphones. We already tested it on jio F220B, Jio f90M, Jio F120b, jio f2403B and Redmi Mi 4i mobile.

  • Download and install "Qualcomm USB Drivers" on PC. If already installed, skip the step
  • Now jio power the device, remove the battery and note the original IMEI number of the device.
  • Put the device in normal mode again and attach the device with the PC via USB cable. There is no need to press any key.
  • If the device is properly connected with the PC, it will create a Qualcomm HS-USBDiagnostic 9091 port under the "Device Manager" section shown below.

  • Now come to the "QLM tool" and open it as Administrator.
  • The device will automatically detect the available Qualcomm HS-USBDiagnostic 9091 port.
  • In the next step, type the same IMEI number in the IMEI1 and IMEI2 sections.

  • Finally hit the "Write IMEI" button from the device. After successful IMEI write, it will show green "PASS" message.

  • done!!! Unplug the USB cable and reboot the device once.

[Please note: Don't forget to reboot the device. Must be rebooted to apply all changes to the device]

In this way, you can easily fix the Jio F30C IMEI number or any network Jio F30C problem. Just download the QLM jio IMEI tool and write the basic IMEI by following the above steps.

No comments:

Post a Comment