New Jio IMEI Repair Tool 2019- QLM IMEI Repair Tool - myTechnoTech-know to fix computer and mobile problem and other

New Jio IMEI Repair Tool 2019- QLM IMEI Repair Tool

Share This

New Jio IMEI Repair Tool 2019- QLM IMEI Repair Tool

Recently we published a post "Jio IMEI Tool" to fix Jio IMEI'' number and now we are here with another new Jio IMEI repair tool working guide.

In this guide, we are interdicting the latest Jio IMEI tool and the name is QLM IMEI Tool. The QLM IMEI tool interface and operating system are almost identical to the WriteDualIMEI (W + G_eMMC) tool.

In essence, if you have jio keypad mobile with the null imei issue, then read the post below to work for the JIO Qualcomm IMEI Repair Tool.

But if you want to test a new IMEI tool for Jio Mobile, download the QLM IMEI Repair Tool to repair the Jio Keypad IMEI 0 problem.

Basically QLM IMEI Repair Tool is a Qualcomm IMEI repair tool for all Qualcomm CPU phones including jio devices. Users can use this free QLm imei tool as Jio IMEI tool.

Recently we tested this new Jio IMEI repair tool 2019 to fix the Jio LF 2403N IMEI number. The best part is that it is working 100% without any issue. We tested this latest Jio IMEI Repair Tool 2019 and we did not find any problem at the time of IMEI flashing.

So if you are looking for a new Jio LYF IMEI repair tool, then you should try this QLm IMEI tool once.

Let's see "How to write IMEI using Jio IMEI Tool 2019?"

Download QLM IMEI Repair Tool Free [ Jio IMEI Repairing Tool 2019 ]

Latest Version Of QLM IMEI Repair Tool

Qualcomm USB Drivers For Windows 7 / w8 & w10


How to use jio IMEI Tool 2019 to write IMEI

As we already told you, the QLM IMEI repair tool is a Qualcomm IMEI repair tool for all Qualcomm CPU or chipset-based smartphones, including Keypad Mobile. The user can use the QLM IMEI repair tool as a jio IMEI flash tool for writing any sim or dual SIM IMEI number.

So make sure you are just flashing the IMEI on the Jio Qualcomm device. Otherwise, the tool will not work for you.

We already tested on this QLM IMEI Repair Tool [Jio F90m & Jio LF 2403n] and Android [Redmi 4 Santoni] smartphone.


Instructions to Flash using QLM IMEI Repair Tool on Qualcomm Jio Phone

  • First, download and install "Qualcomm USB Driver" on Windows PC. The driver installation will have to create a bridge connection between the PC and the mobile. If the drivers are already installed, skip the step. In that case, there is no need to re-establish it. If not, follow the link below to install Qualcomm USB drivers in PC.
  • Download and download "QLM IMEI Repair Tool Zip File" on PC. Here you will see the QLM IMEI REPAIR Tool_B19_V.0.01 setup file.
  • Important Step: Enable DIAG mode in the device. [Device should be in current condition]

Please note: DIAG mode must be enabled in Jio Qualcomm phones to flash the IMEI number by using the QLM IMEI Write tool. For the Jio device, there is no need to press any key. Simply plug the device with PC via USB cable.
  • If DIAG mode is enabled in jio phone, then it will show the "quality HS-USB Diagnostic 9091 port" as a "device manager" section as shown in the screenshot.

  • Now run the QLM IMEI REPAIR Tool_B19_V.0.01 as an administrator on the PC. This is a portable software, so its installation is not required. This COM port will be shown automatically according to the screenshot given below.


  • Now type IMEI1 and IMEI2 and then hit the "Write IMEI" button with the tool.

Important: As we all know, most of the Jio Keypad mobile phones are single SIM mobile phones. In that case, type the same IMEI number in the IMEI1 and IMEI2 section.

  • If you are able to see the green "DONE" message, it means that the IMEI jio has flashed properly in the mobile and you are free to unplug the device from the PC.

  • Remove the USB cable and restart it for once. [Should be rebooted]
  • Dial * # 06 # and confirm the device's IMEI status.
  • Done!!! IMEI Flashed on your device using the QLM IMEI tool

An important point to using the QLM IMEI tool

  • The QLM IMEI repair tool is only for Qualcomm devices with Jio Mobile.
  • JL Mobile should be running at the time of IMEI polishing using the QLM tool.
  • Just connect the device to the PC via USB cable and it will automatically enable the diode mode.
  • There is no need to press any key to enable Jio Diag mode. Or Qualcomm HS-USB DIAG port.
  • Do not forget to reboot your device after IMEI is polished. It must be made aware of the amendment.
  • Never try to change the IMEI of the device. It may be illegal in some countries.

Simply download the latest QLM imei device and flash the original IMEI within a few minutes.

No comments:

Post a Comment